Mr.Steam

This 12KW 208V 1PH Heating Element is required for heating operation on Mr. Steam’s Commercial CU model steam bath generators that utilize 208VAC 1...

This 12KW 240V 1PH Heating Element is required for heating operation on Mr. Steam’s Commercial CU model steam bath generators that utilize 240VAC 1...

This 12KW 208V 3PH Heating Element is required for heating operation on Mr. Steam’s Commercial CU model steam bath generators that utilize 208VAC 3...

This 12KW 240V 3PH Heating Element is required for heating operation on Mr. Steam’s Commercial CU model steam bath generators that utilize 240VAC 3...

This 12KW 480V 3PH Heating Element is required for heating operation on Mr. Steam’s Commercial CU model steam bath generators that utilize 480VAC 3...

This 18KW 208V 1PH Heating Element is required for heating operation on Mr.Steam's Commercial CU model steam bath generators that utilize 208VAC 1P...

This 18KW 240V 1PH Heating Element is required for heating operation on Mr. Steam’s Commercial CU model steam bath generators that utilize 240VAC 1...

This 18KW 208V 3PH Heating Element is required for heating operation on Mr. Steam’s Commercial CU model steam bath generators that utilize 208VAC 3...

This 18KW 240V 3PH Heating Element is required for heating operation on Mr.Steam’s Commercial CU model steam bath generators that utilize 240VAC 3P...

This 18KW 480V 3PH Heating Element is required for heating operation on Mr.Steam’s Commercial CU model steam bath generators that utilize 480VAC 3P...

More specifically, for CU360-1400A, 2001 and later 90229-1 was installed in the side of the pressure vessel and was optional as part of the AUX Low...

High Water Level Control NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Mr. Steam 90241MRT AUX Low Pressure Water Board NOTE: To preserve the originality, operation and safety of replacement parts, this product is not r...

This 50amp 120V coil has 4 posts and is typically used with 240V 1PH CU commercial steam bath generators. The line and load side "L" is on top of t...

This 1/4" 240V Water Feed solenoid is required for water fill operation on Mr. Steam's Commercial CU model steam bath generators utilizing 240V con...

This Gauge Glass with 2 Gaskets is required for visual inspection of the water level in the tank vessel on Mr.Steam’s Commercial CU model steam bat...

This Gauge Glass with 2 Gaskets is required for visual inspection of the water level in the tank vessel on Mr. Steam’s Commercial CU model steam ba...

This Gauge Glass with 2 Gaskets is required for visual inspection of the water level in the tank vessel on Mr. Steam's Commercial CU model steam ba...

This Gasket is required for use with heating elements on Mr. Steam's Commercial CU model steam bath generators. The 4-1/2" diameter, 6-hole Gasket ...

Gasket, MX4E-6E, 5-3/4 NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

This Operating Pressure Control 0-15 PSIG is required to ensure appropriate operating steam pressure on Mr. Steam’s Commercial CU model steam bath ...

The Gauge Glass Valve Set is the 2 valves and protective rods. Glass is not included. The orifices and glass will develop lime over time and need p...

O-Ring, Gauge Glass, Viton NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Valve 1/2 F-F MS Series NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.